Air Conditioning Troubleshooting Tips

Air Conditioning Troubleshooting Tips -

It’s typical for the air conditioning system to develop problems from now and then. The cool thing is that you can effectively troubleshoot it and know the issues that it has. To guide you through here are some air conditioning troubleshooting tips:

The System Doesn’t Work At All
If your air conditioning system doesn’t go on spontaneously when the thermostat signals it to cool air, the chances are that the thermostat isn’t working correctly. It’s also possible that the system isn’t receiving electrical power.

To troubleshoot the query, you should start by checking the main power source for a tripped breaker or blown a fuse. To solve the problem, you should reset the breaker and then replace the fuse.

Examine The Compressor
In case your compressor breaks your entire air conditioning system would fail. Check around the compressor for any indications of damage or wear or tare. Listen to the compressor for any strange noises. View around the compressor for ice form up also. If you notice any of these conditions, it may be a sign of a more severe issue, and you should immediately call in an air conditioning expert to inspect the system.

Reset The Power If Not Starting
Like computers, a little reset can frequently fix an HVAC arrangement. All you should do is go to the meter box and then turn the unit off. If adjusted, there could also be an isolator switch for the compressor you can as well turn off. Turn two of these switches off for some minutes before turning on again.

The System Is Running But Doesn’t Cool
If the air conditioning system is running, but you don’t feel any cool air, you should check the thermostat. If the thermostat is in the perfect working condition, you should take a look at the condenser and find out if it’s dirty or blocked. Some of the things that block the air condenser are grass, tall weeds, and other airborne debris.

Water Is Leaking
If water is leaking or pooling at the base of the air conditioning system, condensation may be dripping from one of the tubes that carry it. It’s also possible that something is blocking the flow of water, or the condensate pump isn’t working.

You should start by taking a look at the condensate pump and ensure that it’s connected to an electrical outlet. If the pump is running, but it doesn’t empty, the valve before the discharge is probably stuck. You should unscrew the valve and make the ball inside loose and look for an obstruction.

Inadequate Air Cooling
If the system is working efficiently, but it doesn’t cool your home adequately, you should lower the thermostat five degrees. If this doesn’t resolve, the problem probabilities are that the evaporator is dirty. You need to clean the evaporator and let it run for a few hours. If the problem persists, the chances are that the air conditioning system is too small for your big room.

These are some of the tips on how to troubleshoot the conventional air conditioning problems. You should note that while you can do some of the basic tasks, you should consider hiring a professional to handle the complex work. For example, you should always consult an expert when you have a problem with the coolant.

Leave a Reply

Your email address will not be published. Required fields are marked *